Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 94)

Architecture: The ApplicationTemplate in detail
Error handling
94
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. Activation for one cycle: Via the baseChannelSetErrorQuit method, rising edge FALSE
Ê
TRUE. The
method sets the xQuitErrors input to TRUE for one cycle.
If multiple errors occur, they cannot be acknowledged individually. Further information:
 L_EATP_ModuleErrorHandler ( 124)
9.9.4 Acknowledging errors: Response in the machine module
The xErrorQuitActive output on the L_EATP_ModuleErrorHandler block can be used within a module
application to acknowledge errors on an integrated function block.
Defining errors - standard procedure
ErrorHandler.xQuitErrors := TRUE; //error acknowledgement active as long as value =
TRUE
• The SetErrors method is to be
extended by one function block.
• The MAP_EmptyModul_App1 FB is
to be extended by the
corresponding declaration.
• The xSetError[1...4] inputs must be
connected to the module
application.
• Assign the corresponding
parameter to the respective error
input:
• Error number,
• Error text,
• Error priority,
• Acknowledgement response
• More information:
 L_EATP_ErrorSet ( 119)