Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 61)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
61
Working with the ApplicationTemplate
Integrating I/O modules of the I/O system 1000 with a machine module
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. The variable names that are used in the machine module and that are connected to the I/
O system are summarised in the MM_IO structure.
3. Assign the variables to the physical I/O modules.
4. Activate the Always update variables option by ticking the checkbox (;):