MacDon FD75 OM User Manual
Page 119
Advertising
3.
From the Command Center main page press the icon
with wrench on the open book (A). The CALIBRATION
page appears.
Figure 4.128: Combine Display
4.
On the CALIBRATION page, press the icon with
wrench on the open book (A). The DIAGNOSTIC
READINGS page appears. This page is where you
will be able to complete calibrations, modify header
option and read diagnostic information.
Figure 4.129: Combine Display
5.
When you select a heading in the selection box (A)
a list of different diagnostic readings appears. Select
the AHC SENSING OPTION which will bring up the
Automatic Height Control sensor.
Figure 4.130: Combine Display
169894
105
Revision A
Advertising