MacDon FD75 OM User Manual
Page 168
Advertising
Reposition right arm cylinder as follows:
NOTE:
Reel components are not shown for clarity.
6.
Remove four bolts (A) securing cylinder bracket (B) to
reel arm.
7.
Push reel back until bracket (B) lines up with the aft set
of holes (C).
8.
Reinstall the four bolts (A) to secure bracket to reel arm
at new position.
Figure 4.230: Forward Position
Figure 4.231: Rearward Position
169894
154
Revision A
Advertising