MacDon FD75 OM - Manual (Page 137)

OPERATION
2. When the header with up and down arrows is
highlighted push control knob (A). The following screen
will show up with the header icon highlighted (B).
Figure 4.168: Combine Display, Console, and
Propulsion Lever
3. The following screen will show up with A highlighted
(B). Scroll right using the control knob (A) to highlight
the icon of the header with up and down arrows (C)
behind it.
Figure 4.169: Combine Display, Console, and
Propulsion Lever
4. The Letter A and the screwdriver icon appear. Rotate
control knob (A) until the screwdriver is highlighted (B).
5. Once this icon appears engage the combine separator
and feeder house.
6. Push the control knob (A) and the following graph will
appear with a percentage value at 0.
Figure 4.170: Combine Display, Console, and
Propulsion Lever
169894 123 Revision A