MacDon FD75 OM - Manual (Page 392)

MAINTENANCE AND SERVICING
7. At the tail end, remove reel endshields and endshield
support (C) from the tail end of the reel at applicable
tine tube location.
NOTE:
There are no endshields on the center
disks.
8. At the tail and center discs, remove bolts (A) securing
arm (B) to disc.
Figure 6.266: Tail End
9. Remove bolt (A) at on cam linkage so that tine tube (B)
is free to rotate.
Figure 6.267: Cam End
10. Release bushing clamps (A) using a small screwdriver
to separate the serrations. Pull clamp off tine tube.
Figure 6.268: Bushing Clamp
169894 378 Revision A