MacDon FD75 OM - Manual (Page 31)

SAFETY
11. MD #184372
a. General hazard pertaining to machine operation
and servicing.
b. CAUTION
To avoid injury or death from improper or unsafe
machine operation:
• Read the operator’s manual and follow all safety
instructions. If you do not have a manual, obtain
one from your Dealer.
• Do not allow untrained persons to operate
the machine.
• Review safety instructions with all
Operators annually.
• Ensure that all safety signs are installed
and legible.
• Make certain everyone is clear of machine
before starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of
moving parts.
• Disengage header drive, put transmission in
Neutral, and wait for all movement to stop
before leaving operator’s position.
• Shut off the engine and remove the key from
ignition before servicing, adjusting, lubricating,
cleaning, or unplugging machine.
• Engage safety props to prevent lowering
of raised unit before servicing in the
raised position.
• Use slow moving vehicle emblem and flashing
warning lights when operating on roadways
unless prohibited by law.
Figure 1.33: MD #184372
12. MD #184422
a. Keep shields in place hazard.
b. WARNING
• To avoid injury, stop the engine and remove the
key before opening power drive system shield.
• Keep all shields in place.
Figure 1.34: MD #184422
169894 17 Revision A