MacDon FD75 OM - Manual (Page 246)

HEADER ATTACHMENT/DETACHMENT
7. Remove 9/16 in. nut from bolt (C).
8. Rotate latch (A) down with a 15/16 in. wrench on hex
(B) to raise feed deck slightly so that bolt (C) can be
removed.
9. Rotate latch (A) up and back to lower adapter deck and
disengage transition pan tube (D).
10. Reinstall bolt (C).
11. Repeat for other side of the feed draper deck.
12. Disengage reel safety props, start engine, lower reel
and raise header fully. Stop engine, remove key, and
engage combine lift safety props.
Figure 5.105: Adapter Latch
13. Loosen nut and bolt (A), and disengage hook (B) from
leg on both sides of adapter.
Figure 5.106: Adapter Underside
14. Rotate hook (B) 90° for storage, and retighten bolt (A)
and nut.
Figure 5.107: Adapter Underside
169894 232 Revision A