MacDon FD75 OM User Manual
Page 397
Advertising
16. Tighten clamp (A) with modified channel lock pliers (B)
so that finger pressure will NOT move clamp.
IMPORTANT:
Over-tightening clamp may result in breakage.
Figure 6.278: Clamp Tool
17. At the center disc, install the bolts (A) securing arm (B)
to disc.
18. At the tail end, install reel arm (B) and endshield
support (C) at applicable tine tube location with bolts
(A). Re-install endshields.
NOTE:
There are no endshields on the center
discs.
Figure 6.279: Tail End
169894
383
Revision A
Advertising