MacDon FD75 OM - Manual (Page 239)

HEADER ATTACHMENT/DETACHMENT
9. Position coupler (A) onto combine receptacle, and pull
handle (B) to fully engage coupler into receptacle.
10. Connect reel fore-aft/header tilt selector harness (C) to
combine harness (D).
Figure 5.89: Coupler
11. Rotate disc (A) on adapter driveline storage hook, and
remove driveline from hook.
Figure 5.90: Driveline
12. Pull back collar (A) on end of driveline, and push onto
combine output shaft (B) until collar locks.
Figure 5.91: Driveline
169894 225 Revision A