MacDon FD75 OM - Manual (Page 190)

OPERATION
2. Swivel front wheel assembly (A), so wheels are aligned
with lower frame.
3. Remove pin (B) and pull wheel assembly towards rear
of header. Store pin (B) in hole (C) at top of leg.
4. Pull handle (D) up to release and lower the linkage in
the vertical support.
Figure 4.262: Front (Left) Wheels
5. Align lift hook (A) with lug (B) and lift wheel assembly
to engage pin in hook (A). Ensure latch (C) is engaged.
6. Install clevis pin (D) and secure with hairpin to center
of axle.
Figure 4.263: Securing Wheels
A - Hook B - Lug
C - Latch D - Clevis Pin
169894 176 Revision A