MacDon FD75 OM User Manual
Page 374
Advertising
3.
Remove the cotter pin (A) and slotted nut (B) from the
motor shaft.
4.
Remove speed sensor disc (C) (if installed).
Figure 6.219
5.
Loosen the six bolts (B) and slide the hydraulic motor
downwards to loosen driven chain (A).
6.
Remove the drive chain (A) from drive sprocket.
Figure 6.220: Drive Chain
7.
Remove sprocket (B) from shaft.
IMPORTANT:
Do not use pry bar and/or hammer to remove
sprocket; this will damage the motor. If sprocket
does not come off by hand, use a puller.
Figure 6.221: Reel Drive
169894
360
Revision A
Advertising