MacDon FD75 OM User Manual
Page 358
Advertising
4.
Loosen
draper
by
turning
adjuster
bolt
(A)
counterclockwise.
Figure 6.180: Tensioner
5.
Remove fasteners (A) and tube connectors (B) at the
draper joint to uncouple the draper.
6.
Pull the draper off the drive roller.
Figure 6.181: Draper Connector
7.
Line up the setscrews with the hole (A) in the guard.
Remove the two setscrews that hold the motor onto
the drive roller.
NOTE:
The setscrews are a 1/4 turn apart.
8.
Remove the four bolts (B) that hold motor to the drive
roller arm.
NOTE:
Plastic shield (C) may require removal to gain
access to the top bolt.
Figure 6.182: Drive Roller
169894
344
Revision A
Advertising