MacDon FD75 OM - Manual (Page 369)

MAINTENANCE AND SERVICING
3. Remove three screws (A) and remove lower cover (B).
4. Release tension on chain (C). Refer to Adjusting Chain
Tension on Double Reel Drive, page 352 for double reel
drive.
Figure 6.205: Drive Cover
5. Support inboard end of right reel with a front end loader
and nylon slings (or equivalent setup).
NOTE:
To avoid damaging or denting center tube,
support reel as close as possible to the end disc.
Figure 6.206: Supporting Reel
6. Remove four bolts (A) attaching reel tube to U-joint (B).
Figure 6.207: U-Joint
169894 355 Revision A