Rockwell Automation 1302 575v AC Drive - Canada Only - Manual (Page 6)

1–2 Introduction
Publication 1302-5.0 — January, 1998
!
ATTENTION: Only qualified electrical personnel
familiar with the construction and operation of this
equipment and the hazards involved should install,
adjust, operate and/or service this equipment. Read and
understand this section in its entirety before
proceeding. Failure to observe this precaution could
result in bodily injury or loss of life.
ATTENTION: An incorrectly installed or applied
Drive can result in component damage or a reduction
in product life. Wiring or application errors such as
undersizing the motor, incorrect or inadequate AC
supply or excessive ambient temperatures may result in
damage to the Drive or motor.
ATTENTION: This Drive contains ESD
(Electrostatic Discharge) sensitive parts and
assemblies. Static control precautions are required
when installing, testing, servicing or repairing this
assembly. Component damage may result if ESD
control procedures are not followed. If you are not
familiar with static control procedures, reference
Allen–Bradley Publication 8000 – 4.5.2, Guarding
against Electrostatic Damage or any other applicable
ESD protection handbook.