Door opening procedure, Opening the low voltage doors, Chapter 3 – Rockwell Automation 1512B MV Controllers, 200/400A Two-High Cabinet, Standard and Arc-Resistant Enclosure User Manual

Page 29: Installation – arc-resistant enclosure (arcshield), Chapter

Advertising
background image

Rockwell Automation Publication 1500-UM055G-EN-P - May 2013

21

Chapter

3

Installation – Arc-Resistant Enclosure
(ArcShield)

This installation section contains information on arc resistant styles of
enclosures, referred to in this manual as “ArcShield”.

Door Opening Procedure

Opening the Low Voltage Doors

Low voltage doors are identified as LV in

Figure 17 on page 18

.

1. To access the compartments for ArcShield cabinets – turn the release

handle counter-clockwise 90º.

2. The door is now released and will swing open.

3. Reverse the procedure to secure the door.

Figure 20 - Access to Low Voltage Compartments

IMPORTANT

For information on the installation site preparation, see Publication

MV-QS050_-EN-P

.

ATTENTION: Use suitable personal protective equipment (PPE) per local codes
or regulations. Failure to do so may result in severe burns, injury or death.

LV

MV

LV

MV

LV

MV

LV

MV

Chimney

Upper Low Voltage

Door handle

Lower Low Voltage

Door handle

Plenum

Upper Low Voltage
Door handle

Lower Low Voltage
Door handle

Advertising