Rockwell Automation 1512B MV Controllers, 200/400A Two-High Cabinet, Standard and Arc-Resistant Enclosure - Manual (Page 37)

Rockwell Automation Publication 1500-UM055G-EN-P - May 2013 29
Installation – Arc-Resistant Enclosure (ArcShield) Chapter 3
Figure 30 - Removing Cable Duct Boot and Barrier
5. To access the left side of the power bus, locate the two bus access covers at
the rear, left side of the power cell. Remove the four self-tapping screws
from each cover and remove the covers (see
Figure 7 on page 10 ).
Figure 31 - Removing Bus Access Covers
Current Transformers
CT Mounting Plate
Loosen Retaining Screws
Cable Duct Boot
Remove Retaining Screws
Cable Duct Barrier
Remove Bus Access Cover