Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 37)

Publication 1408-UM001B-EN-P - May 2008 37
SCADA Applications Chapter 5
5. In the right hand pane, under the Data Source tab, browse to
your power monitor.
You may use a serial or Ethernet network driver.
6. Make sure that the topic is highlighted in the left pane, and that
the power monitor is also highlighted in the right pane, then
click Apply.
7. Click the Data Collection tab.
TIP
When using a DH485 driver, change the connection type to
local addressing mode in the Advanced Communication tab.
This is especially important when several topics use the DH485
driver.