Rockwell Automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 107)

Rockwell Automation Publication 1734-UM017B-EN-P - October 2013 101
Adapter Web Dialogs Appendix B
• Change the password by typing the new value for New Password and
Confirm Password, noting the following:
–
The entry is case sensitive.
– The default value is the word password.
3. Click Apply Changes.
Work with the Browse
Chassis Page Use the Browse Chassis page for the following:
• See what modules are present on the system.
• Run a query from slot 1 to slot 63.
• Display the modules found based on the query.
• Provide an easy way to see which modules the adapter recognizes on
your system.
To work with the Browse Chassis page, follow these procedures.
1. From the Home page, click Browse Chassis
.
The following page displays.
2. Click START to run a query. A Browser Chassis page opens.
Note that module hyperlinks are inactive before the query completes or is
cancelled.