6 – troubleshoot the adapter, Interpret the status indicators, Status indicators for point i/o adapters – Rockwell Automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 83: Chapter 6, Troubleshoot the adapter, Chapter
Rockwell Automation Publication 1734-UM017B-EN-P - October 2013
75
Chapter
6
Troubleshoot the Adapter
This chapter describes the different status indicators available in the 1734
POINT I/O and 1738 ArmorPOINT I/O EtherNet/IP adapters and how to
interpret these indicators to help troubleshoot the modules.
The following table lists where to find specific information
Interpret the Status
Indicators
The 1734 POINT I/O and 1738 ArmorPOINT I/O EtherNet/IP adapters have
the following status indicators:
•
Network, Module, POINTBus, and EtherNet/IP Link Status
•
System Power
•
Field/Adapter Power
Status Indicators for POINT I/O Adapters
The following describes the status indicators on the 1734-AENTR.
Topic
Page
Interpret the Status Indicators
Status Indicators for POINT I/O Adapters
Status Indicators for ArmorPOINT I/O Adapters
0 2
0
1734-AENTR Series B
Module
Status
Network
Activity
Network
Status
Point Bus
Status
System
Power
Field
Power
POINT I O
Link 1
Activity/
Status
Link 2
Activity/
Status
IP ADDRESS
44848
Link 1 Activity/Status
Link 2 Activity/Status
System Power
Field Power
Module Status
Network Activity
Network Status
POINTBus Status