Rockwell Automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 77
Advertising
Rockwell Automation Publication 1734-UM017B-EN-P - October 2013
69
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software Chapter 5
b. Major Fault on Controller If Connection fails While in Run Mode
10. Click OK.
11. Choose File
→
Save and enter the name and location of the file.
Advertising
This manual is related to the following products: