Rockwell Automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 43)

Rockwell Automation Publication 1734-UM017B-EN-P - October 2013 35
Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4
6. Click Change...
The Module Definition dialog opens.
7. Enter or select values for Revision, Electronic Keying, Rack Connection,
and Time Sync Connection, noting that we used the following values:
8. Click OK to accept the configuration.
The module appears indented under under the I/O Configuration folder.
Series A
Revision 5.1
Electronic Keying Compatible Module
Rack Connection None
Time Sync Connection None