Rockwell Automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 110
Advertising
104
Rockwell Automation Publication 1734-UM017B-EN-P - October 2013
Appendix C Configure the RSLinx Ethernet Communication Driver
2. From the Communications menu, select Configure Drivers.
3. Select Ethernet Devices from the list and click Add/New...
4. Select the default driver name (for example, AB_ETH-1) or type in a name
and click OK.
The Configure driver
dialog opens.
Advertising
This manual is related to the following products: