Physical features of your adapters, Physical features of the 1734-aentr adapters, Physical features of the 1738-aentr adapters – Rockwell Automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 11
Rockwell Automation Publication 1734-UM017B-EN-P - October 2013
3
Overview of the 1734 POINT and 1738 ArmorPOINT EtherNet/IP Adapters Chapter 1
Physical Features of Your
Adapters
The 1734 Adapters have the following components:
•
Removable Terminal Block (RTB);
•
Network address Thumbwheel
•
Connectors (two RJ45 EtherNet/IP connectors)
•
Status indicators (Module Status; Network Status; POINTBus Status;
Network Activity; Link 1 Activity/Status; Link 2 Activity/Status;
System Power; Field Power)
Physical Features of the 1734-AENTR Adapters
The 1738 Adapters have the following components:
•
Network address Switches
•
Two EtherNet/IP Female M12 connectors
•
Mini Style 4-Pin in Male Connector
•
Status indicators (Module Status; Network Status; POINTBus Status;
Network Activity; Link 1 Activity/Status; Link 2 Activity/Status;
System Power; Adapter Power)
Physical Features of the 1738-AENTR Adapters
1734-AENTR Series B
Module
Status
Network
Activity
Network
Status
Point Bus
Status
System
Power
Field
Power
POINT I
O
0
2
0
2
Link 2
Activity/
Status
3
4
5
6
7
Link 1
Activity/
Status
44849
Status indicators
RTB removal handle
Removable Terminal
Block (RTB)
DIN rail locking screw
(orange)
EtherNet/IP
network RJ-45
connectors
Network
address
thumbwheel
1738-AENTR
Series B
EtherNet I/P
Adapter
Status
Network
Activity
Network
Status
PointBus
Status
System
Power
Adapter
Power
conformance tested
™
PWR
IP ADDRESS
Link 2
Activity/
Status
Link 1
Activity/
Status
44830
M12 connectors
Mini Style 4-Pin in
Male Connector
Network address
switches
Status indicators