Rockwell Automation Motion Analyzer Software - Manual (Page 125)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 125
Sizing Your System Chapter 2
The Selected SolidWorks Assembly dialog box opens.
5. Verify the following conditions:
• The SolidWorks assembly must be open in SolidWorks software
before the SolidWorks integration wizard is launched.
• The SolidWorks file must be an assembly and not simply a part.
• Only one instance of SolidWorks software can be running in order for
integration to work.
6. Click Refresh when changes are made to the associated SolidWorks model
to make sure Motion Analyzer software is interfacing with the most recent
version of the SolidWorks assembly.
7. Verify this is the correct model and click Next.
If the model is not correct, open the correct assembly in SolidWorks
software and click Refresh.