Rockwell Automation Motion Analyzer Software User Manual
Page 130
130
Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
Chapter 2
Sizing Your System
The SolidWorks Load Data dialog box opens.
This dialog box lets you compare the actual Motion Analyzer velocity
profile to the velocity profile returned from SolidWorks.
24. Check Invert SolidWorks Output Data if the velocity profiles were
reversed to resolve the discrepancy and correct your model. The
discrepancy is due to different coordinate systems, which are arbitrarily
defined.
25. Click Proceed to Transmissions.
This step changes depending upon the application.
IMPORTANT
With these versions of SolidWorks and Motion Analyzer, the inertia
data is not brought out automatically. This means that Motion
Analyzer has no knowledge of the inertia ratio, and therefore cannot
do the Motion Analyzer Simulation on the Solution tab.