Rockwell Automation Motion Analyzer Software - Manual (Page 23)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 23
Welcome to Motion Analyzer Software Chapter 1
There are two areas of interest in the Group view, as illustrated in Figure 14 .
Figure 14 - Group View Example
Table 9 - Power Rail View Options
Options Description Page
Power Rail Image
(label 1 in Figure 14 )
Power rail image based on the current system configuration. This graphic only
applies to multi-axis drive families.
24
Axis Summary Image
(label 2 in Figure 14 )
Displays a summary of the current axis configurations including drive module
and motor/actuator catalog numbers.
25