Rockwell Automation Motion Analyzer Software User Manual
Page 192
192
Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
Chapter 2
Sizing Your System
Figure 141 - Transmission Data Dialog Box
There are three options for entering transmission component parameters to
calculate the transmission component Ratio, Efficiency, Inertia and Friction
Torque values. The applicability of these options change depending upon the
type of transmission component.
Table 112 - Calculate the Transmission Component Ratio
Parameters
Description
Page
Compute Using Inertia and Ratio
Directly enter the transmission component ratio and effective
inertia. This option is available for all transmission components.
Compute Using Pitch Circle Diameter
Compute the desired data (ratio and inertia values) by using the
pitch circle diameter. This option is not available for a coupling
transmission.
Compute the desired data (ratio and inertia values) by using the
number of teeth. This option is not available for a coupling
transmission.