Logix ladder add-on instructions – Rockwell Automation Motion Analyzer Software User Manual
Page 161
Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
161
Sizing Your System
Chapter 2
2.2.2.9.2. Logix Ladder Add-On Instructions
To use this function it is necessary to have the following suite of cam-building
Add-On Instructions installed with your RSLogix 5000 project:
Table 88 - CAM-building Add-On Instructions
1. On the Types of Exports dialog box, select Logix CAM Profile Editor.
2. Click Next.
The CAM Set-up dialog box opens.
3. Select whether your CAM in RSLogix 5000 software is time or position
based.
In this example, an MATC export was selected.
4. Click Next.
File Name
Description
AOI_CG_00_Import_then_delete_this.L5X
Add-On Instructions files
AOI_CG_00_Controller_Tags.CSV
AOI_CG_00_Cam Generator Setup.doc
Installation instructions
Cam_Generator_V2_1_Example.ACD
Generic (blank) project file