Rockwell Automation Motion Analyzer Software - Manual (Page 41)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 41
Welcome to Motion Analyzer Software Chapter 1
1.2.2.4.2. Power Supply/Accessories - Integrated Drive-Motor (IDM) Systems
The integrated drive-motor (IDM) power interface module (IPIM) is effectively
a power management module for the DC link to a group of individual IDM
units, but to the 2094 power rail it looks like an axis module. Each IPIM module
can handle up to 16 axes, with certain limitations.
Table 21 - IPIM Module Configuration
1.2.2.4.2.1. Power Data Tab
Click the Power Data tab to view regeneration and motoring data for each IDM
unit.
Figure 26 - Power Data Tab
Options Description Page
Power Data Tab View regeneration and motoring data for each IDM unit. 41
IPIM Module Selection Tab Lets you select the IPIM module. 42
Cable Length Tab
Cable selection for connecting IPIM module-to-IDM unit and
IDM unit-to-IDM unit.
43
Control Power Tab
• Bar graph for control power
• Summary view
• Details view
44
Configure IPIM Module
BOM Tab Configure the bill of materials (BOM) for the power supply after fully sizing
the application.
45