Rockwell Automation Motion Analyzer Software - Manual (Page 201)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 201
Sizing Your System Chapter 2
2.7. Choose Your Drive
Family
Use the Drive Family Selection
tab to enter application requirements and select a
viable drive family.
Figure 149 - Drive Family Selection Assistant Dialog Box
Enter the following parameters to further narrow the drive family options and
help you decide which drive is best for your application.
Table 120 - Servo Drive Family Selection Properties
Parameters Description
Applications
Requirements
(label 1 in
Figure 149 )
Supply Type Select Single phase AC (AC1ph), 3-phase AC (AC3ph), or DC supply type.
Nominal Voltage From the Nominal Voltage pull-down menu, choose the nominal voltage value.
Average Motoring
Power
This value is displayed for reference. Click Details to view more information.
More Options (1)
( Figure 150 )
Voltage Type Select an option to enter a single value for voltage or a range of voltages.
Lower Nominal
This parameter is required when you select the option to enter a range for the voltage type.
Enter the lower value for the voltage range.
Upper Nominal
This parameter is required when you select the option to enter a range for the voltage type.
Enter the upper value for the voltage range.
Tolerance This is the high and low tolerance for the voltage range.
Display Window
(label 2 in
Figure 149 )
Displays the available electric cylinder options.
(1) Click More Options to further narrow the drive parameters and help you decide which motor is best for your application.