Rockwell Automation Motion Analyzer Software - Manual (Page 139)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 139
Sizing Your System Chapter 2
2.2. Define Your Profile There are two ways to enter your Motion Profile into Motion Analyzer software.
Begin by clicking Edit Profile in the Cycle Profile Data dialog box.
Table 74 - Motion Profile Options
Template Type Description Page
Less Options Profile Editor
Mode
This is the default mode. This mode is also accessed by clicking Less Options
in the More Options Profile mode. This mode lets you enter a simple profile
which consists of an acceleration, coast/dwell, and deceleration.
140
More Options Profile Editor
Mode
This mode is accessed by clicking More Options in the Less Options Profile
mode. This mode lets you enter more complex motion profiles by providing
you with the ability to enter data for individual profile segments, import or
export profile data, and apply external loads to the individual profile
segments.
142