Converter and shunt tab – Rockwell Automation Motion Analyzer Software User Manual
Page 53
Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
53
Welcome to Motion Analyzer Software
Chapter 1
1.2.2.4.4.1.2. Converter and Shunt Tab
Select shunt and capacitor modules for your system.
Figure 39 - Converter and Shunt Tab
Table 34 - Converter and Shunt Tab Properties (refer to
)
Parameters
Description
Shunt Selection and Component
Listing
(label 1 in
In this section you select a shunt for each axis, and a capacitor module for the
system.
Calculation Utilizations
Click Calculate Utilizations to analyze the behavior of the bus, and to calculate
the drive and shunt utilizations.
Utilization
(label 2 in
The drive continuous and peak current utilizations and the shunt continuous
current utilization histograms are displayed in this area. Click the drive module
catalog number to view the drive specifications.