Metrohm 914 pH / Conductometer - Manual (Page 22)

3.1 Unpacking and inspecting the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭
pH Meter/Conductometer
3 Installation
3.1 Unpacking and inspecting the instrument
3.1.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.1.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.1.3 Scope of application
pH Meter/Conductometer instruments have been designed for mobile
application outdoors and/or in the laboratory.
CAUTION
Influence of weather conditions
Damage to instruments as a result of sun irradiation or temperatures
below the freezing point.
When you do not use the instrument, do not expose it to direct sun-
light and to temperatures below 0 °C.
3.2 Power supply
The pH Meter/Conductometer is equipped with a built-in battery and
can thus be used for mobile applications. For stationary use in the labora-
tory, the instrument can be operated with a power supply unit.
NOTE
Battery state of charge
You receive the battery in a partially charged state. However, you may
have to recharge it again before you can use the instrument for the first
time.