Metrohm 914 pH / Conductometer - Manual (Page 55)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
pH Meter/Conductometer
￭￭￭￭￭￭￭￭ 45
￭ on
￭ off: is the default setting
pH
Slope lower limit Editing dialog for the entry of the lower limit value.
￭ Default value: 95.0 / input range: 1.0 - 999.9%
pH
Slope upper
limit Editing dialog for the entry of the upper limit value.
￭ Default value: 103.0 / input range: 1.0 - 999.9%
pH
Limit value
pH(0) Selection dialog for selecting whether the limit value is to be applied.
￭ on
￭ off: is the default setting
pH
pH(0) lower limit Editing dialog for the entry of the lower limit value.
￭ Default value: 6.40 / input range: 0.00 - 99.99
pH
pH(0) upper
limit Editing dialog for the entry of the upper limit value.
￭ Default value: 8.00 / input range: 0.00 - 99.99
K
Limit value c Selection dialog for selecting whether the limit value is to be applied.
￭ on
￭ off: is the default setting
K
c lower limit Editing dialog for the entry of the lower limit value.
￭ Default value: 0.400 /cm / input range: 0.001 - 500 /cm
K
c upper limit Editing dialog for the entry of the upper limit value.
￭ Default value: 0.550 /cm / input range: 0.001 - 500 /cm
New sensor ▶ Menu dialog with the individual menu lines for entering a new sensor.
Sensor type Selection dialog for the sensor type.
￭ pH electrode
￭ Conductivity
￭ Metal electrode
￭ Temp. sensor
￭ Other sensor...
Sensor name Editing dialog for entering the sensor name.
Order number Editing dialog for entering the Order number.
Serial number Editing dialog for entering the Serial number.
pH
Slope Editing dialog for the entry/modification of the Slope.