Metrohm 914 pH / Conductometer - Manual (Page 58)

4.7 Menu dialogs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
48 ￭￭￭￭￭￭￭￭
pH Meter/Conductometer
￭ Seiko (ESC-POS)
Roll printer with paper width 110 mm
￭ Citizen ESC-POS)
Roll printer with paper width 80 mm
￭ Custom (ESC-POS)
Roll printer with paper width 60 mm
￭ Universal (ESC-POS)
Universal roll printer with variable settings:
– Paper width
50 - 200 mm
– Print resolution
100 - 600 dpi
– Print type
Line or Matrix
4.7.6 Configuration
The Configuration menu dialog for all instrument settings is shown
below with the structure and the description.
Last decimal place Selection dialog for selecting whether the Last decimal place is displayed for
the pH measured values with three digits at most.
Drift value monitoring is not influenced by this setting.
￭ on: Last decimal place is displayed.
￭ off: Last decimal place is not displayed.
Date Editing dialog for entering the system date.
Date format: YYYY-MM-DD
Time Editing dialog for entering the system time.
Time format: hh:mm:ss
Power off after Editing dialog for entering the time for the function Power off after x
minutes. The instrument shuts down automatically after this time.
This function is disabled while the instrument is charged and during time-depen-
dent recording of measured values with a set time interval.
￭ Default value: 15 / input range: 1 - 60, or
￭ off for continuous operation.
Turn off LCD after Editing dialog for entering the time for the function Turn off LCD after x
minutes. The display turns off after this time and can be turned back on again
with any key other than the key.
￭ Default value: 15 / input range: 1 - 60, or
￭ auto for dimming after 20 seconds and switching off the display after
another 60 seconds.
￭ off for continuous operation.