Metrohm 914 pH / Conductometer - Manual (Page 50)

4.7 Menu dialogs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
40 ￭￭￭￭￭￭￭￭
pH Meter/Conductometer
Temperature Editing dialog for the manual entry of the calibration temperature.
￭ Default value: 25.0 °C / input range: 0.0 - 99.9 °C
Reference temp. Editing dialog for the entry of the reference temperature of the calibration
standard.
￭ Default value: 25.0 °C / input range: 0.0 - 99.9 °C
Stand. conduct. Editing dialog for the entry of the calibration standard value.
￭ Default value: 12.800 mS/cm / input range: 0.0000 - 2,000.0 mS/cm
Temp. compens. Editing dialog for the entry of the temperature compensation.
￭ Default value: 2.07%/°C / input range: 0.00 - 9.99%/°C
Report Selection dialog
￭ on
￭ off: is the default setting
4.7.3 Measured values
The Measured values menu dialog is shown below with the structure
and the description.
Values 1. Selection dialog for viewing and deleting the Values on the instrument.
2. Selection dialog to indicate how the Values are to be saved on the instru-
ment for output.
￭ view
The measured values are shown individually on the display and can be tog-
gled individually with the arrow keys.
In addition, you can navigate in the measured value list as follows using the
key:
– If you push the key briefly, then the last measured value will be dis-
played.
– If you hold the key for longer, then the first measured value will be
displayed.
￭ delete all
All measured values on the instrument will be irreversibly deleted.
￭ delete last
The latest (newest) measured value will be irreversibly deleted.
￭ save as CSV
The currently saved measured values will be saved on the instrument as a
CSV file (see "CSV file", page 57).
￭ save as PC/LIMS
The currently saved measured values will be saved on the instrument as PC/
LIMS file (see "PC/LIMS report", page 57).
Data Selection dialog to indicate whether the Data are to be printed and/or saved.