Metrohm 914 pH / Conductometer - Manual (Page 56)

4.7 Menu dialogs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
46 ￭￭￭￭￭￭￭￭
pH Meter/Conductometer
￭ Default value: 100.00 / input range: 0.10 - 999.99%
pH
pH(0) Editing dialog for the entry/modification of pH(0).
K
Cell constant Editing dialog for the entry/modification of the Cell constant.
￭ Default value: 1.00 /cm / input range: 0.001 - 500 /cm
Calibration
interval Editing dialog for the entry of time in days for the Calibration interval.
￭ Default value: off / input range: 1 - 999 d
￭ off disables the Calibration interval.
Temp. sensor Selection dialog to indicate the temperature sensor type for the respective sen-
sor.
￭ Pt1000
￭ NTC
– R(25°C)
Editing dialog
Default value: 30,000
Ω / input range: 10,000 - 100,000 Ω
– B value
Editing dialog
Default value: 4,100
Κ / input range: 1,000 - 9,999 Κ
pH
Slope limit value Selection dialog for selecting whether the limit value is to be applied.
￭ on
￭ off: is the default setting
pH
Slope lower limit Editing dialog for the entry of the lower limit value.
￭ Default value: 95.0 / input range: 1.0 - 999.9%
pH
Slope upper
limit Editing dialog for the entry of the upper limit value.
￭ Default value: 103.0 / input range: 1.0 - 999.9%
pH
Limit value
pH(0) Selection dialog for selecting whether the limit value is to be applied.
￭ on
￭ off: is the default setting
pH
pH(0) lower limit Editing dialog for the entry of the lower limit value.
￭ Default value: 6.40 / input range: 0.00 - 99.99
pH
pH(0) upper
limit Editing dialog for the entry of the upper limit value.
￭ Default value: 8.00 / input range: 0.00 - 99.99
K
Limit value c Selection dialog for selecting whether the limit value is to be applied.
￭ on