Canon GM-1000 - Manual (Page 22)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
22
2.8.2. RS-232C command input
RS-232C command input allows the following:
• Operation setting
• Parameter setting
• Error processing
• Status check
(For details, see 8. “Commands”)
In case not using high-speed serial communication, RS-232C communication command input is enough
for the following function:
• Step movement
• Raster scan (Continuous oscillation of a certain angle at a fixed frequency)
(Communication specifications)
Wiring Cross wiring
Communication rate 38400 bps
Data length 8 bits
Stop bit 1
Parity None
Data format ASCII code
Delimiter code LF (0x0a) or CR (0x0d)