Canon GM-1000 - Manual (Page 84)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
84
• Input the serial number. ⑧
A folder with the same name as the number input here is generated in the saved results folder, and
tuning results are saved. Usually the controller’s serial number is input, however, any number that
is easy for the user to manage may be input.
• Pressing the Start button. Then starts the tuning. ⑨
• The name of the motor and mirror to be tuned will display in Target Galvano. ⑩
• Details of the current tuning being carried out display in Command. ⑪
• Detailed tuning operation conditions display in Execution Log. This log is saved as a text file of
tuning results in the saved results folder. ⑫
• Press the Stop button to stop while tuning. ⑬
• Press the End button to close the tuning menu. ⑭
⑩
⑪
⑫
⑬ ⑭