Canon GM-1000 - Manual (Page 62)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
62
5. Monitor Output and Digital Input Functions
The controller has an analog monitor output connector for monitoring the operation status and a digital
I/O connector for external signal input.
5.1. Connector Pin Assignment
The controller is equipped with the following:
Analog monitor output connector ×1
Digital I/O connector ×1
In order to evaluate this galvano scanner, the above output connectors are connected, and a monitor
board for evaluation that can confirm analog output signals and the I/O of a digital signal is prepared
as an optional product. Please contact the Sales Department for details.
The signal name is displayed on the evaluation monitor board. Please check the signal after referring
to the table of the following pin arrangement.
Analog monitor output
connector
Digital I/O
connector
Monitor Board for
evaluation