Canon GM-1000 - Manual (Page 83)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
83
• Display of the Auto Tuning screen
• Select the setting file (Definition File). ④
Setting files will be provided by Canon.
• When necessary, select parameter files to load in the controller prior to tuning. ⑤
Check the “Load Parameter File before start” checkbox and specify the parameter file. Use in
situations when you want to load a parameter file and then carry out tuning.
Parameter files to be loaded will be prepared by the user. Refer to 9.5 for the file creation method.
• Select the folder for results (Result Folder). ⑥
Tuning results will be saved.
• Select the axis. ⑦
Select the axis connected to the motor and mirror that corresponds to the Definition File.
④
⑤
⑥
⑦
⑧
⑨