Canon GM-1000 - Manual (Page 133)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
133
11.1.1.
Writing Procedure
Carry out operations according to the following procedure.
It will be necessary to operate DIP switches and jumper switches on the controller.
Please follow this procedure.
1. Preparation
- Turn off power to the GC-201 controller
- Connect a RS-232C cable to the computer
DIP switch and jumper switch default state
SW1 : 1-OFF
SW2 : 1-OFF
JP1 : 1-2 short
JP2 : 1-2 short
SW1
SW2
JP1
JP2
JP1
1 2 3
JP2
1 2 3
According to the controller settings, the default state of "2" of SW1 or SW2 will differ.
This is regardless of a firmware update. Do not change from the default state.
SW1
1 2
OFF
ON
SW2
1 2
OFF
ON