Canon GM-1000 User Manual
Page 137
CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
137
11.2. Parameter Changes from the Number of Encoder Divisions
As explained in 2.8.1 Number of Encoder Pulses, the scanner motor encoder signal is divided into
8,192 divisions generating encoder pulses within the GC-201 controller.
Firmware versions prior to DSP Ver. XXXXXXXX were set with 2,048 divisions.
When currently using firmware with 2,048 divisions, with the following procedure, usage with 8,192
divisions is possible.
Procedure for changing the number of encoder divisions
• This will update the firmware to the latest version. See 11.1 Firmware Update for instructions on
updating the firmware.
Please contact your sales representative about the latest firmware update CD.
• Turn on the GC-201 controller.
• Open the All Parameter tab in the control software. ①
①
②
③