Rice Lake Counterpart Configurable Counting Indicator - User Manual Rev. E - Version 2.5 - Manual (Page 45)

Configuration 39
SOFTKEYS Menu
Figure 3-14. Softkey Menu Layout
Date sub-menu
DFORMT MMDDY4
DDMMY4
Y4MMDD
Y4DDMM
MMDDY2
DDMMY2
Y2MMDD
Y2DDMM Sets the date format. Y4 will use a four-digit year value, such as 2011, while Y2 will use a two-digit
value, such as 11.
D SEP SLASH
DASH
SEMI Sets the date separator as a slash, dash, or semicolon.
BLANK
TIME/DATE
SOFTKEYS
DSPTAR
DSP ACC
CLRTAR
SK1-12
CLRUW
DESC
CLRBFR
PART#
CODE
SCL SEL
LOT
PRINT PLT
SWAP DSP
RESET ID’S
IN
OUT
CLR CN
QUANTITY
TOTAL +
TOTAL -
CLR TTL
UW UPDT
TARE UPDT
SETPT
BATSTRT
BATSTOP
BATPAUSE
BATRST
Parameters Descriptions
BLANK No softkey function selected
TIMEDATE Allows user to set time and date
CLRTAR Clear tare
CLRUW Clear unit weight value
CLRBFR Clear buffer.
DESC Description update.
DSPTAR Display tare value (times out after 10 seconds)
DSPACC Display accumulated weight value (may be printed or cleared while displayed) – times out after 10 seconds
PART # Part number entry.
SCLSEL Allows user to select scale 1, scale 2 for displayed weight,count in multi-scale unit
Table 3-13. Softkey Menu Parameters
Table 3-12. Region Menu Parameters