Rice Lake Counterpart Configurable Counting Indicator - User Manual Rev. E - Version 2.5 - Manual (Page 86)

80 Counterpart Counting Scale Indicator
Command Description Supported Ticket Formats
<G> Gross weight, current scale GFMT, NFMT, TOTALFMT,
PALFMT, CFMT, ACCFMT
HDRFMT1, HDRFMT2
<G#n> Gross weight, scale n
<N> Net weight current scale
<N#n> Net weight, scale n
<T> Tare weight in displayed units. Add four before bracket to print header
<T#n> Tare weight, scale n
<A> Accumulated weight, current scale
<A#n> Accumulated weight, scale n
<AC> Number of accumulations, current scale (5-digit counter)
<AC#n> Number of accumulations, scale n
<AD> Date of last accumulation, current scale
<AD#n> Date of last accumulation, scale n
<AT> Time of last accumulation, current scale
<AT#n> Time of last accumulation, scale n
<UID> Unit ID number
<CN> Consecutive number
<C> Piece count, current scale
<C#n> Piece count, scale n
<NLnn> New line (nn = number of termination (<CR/LF> or <CR>) characters)*
<SPnn> Space (nn = number of spaces)*
<SU> or <WA> Surpress unis. Toggle weight data format (formatted/unformatted)**
<TI> Time
<nnn> ASCII character (nnn=decimal value of ASCII character). Used for
inserting control characters (STX, for example) in the print stream.
<DA> Date
<TD> Time & Date
<H1> Header 1
<H2> Header 2
<IDC> Loaded ID Code - 32 characters maximum
<IDD> Loaded ID Description - 32 characters maximum
<IDLC> Loaded ID Location - 12 characters maximum
<IDP> Loaded ID Part Number - 32 characters maximum
<IDLT> Loaded ID Lot - 32 characters maximum
<IDU> Loaded ID Units - 1 character maximum
<IDT> Loaded ID Tare - 9 characters maximum (range 0.0 to 9999999.0)
<IDW> Loaded ID Unit Weight - 9 characters maximum (range 0.0 to
9999999.0)
<IDQ> Loaded ID Quantity - 11 characters maximum (range -2000000000 to
2000000000)
<TTLV> Totalization Value - 11 character maximum (range -2000000000 to
2000000000). When not in totalization mode, the value will be 0.
<TTLC> Totalization Count - 4 characters maximum. When not in totalization
mode, the value will be 0.
<TTLW> Print totalized weight. When not in totalization mode, the value will be 0.
<WA> Suppresses all (units, decimal, leading, spaces)
<WLU> Without leading spaces and units, decimal point is still applied.
<WU> Suppresses units but leaves leading spaces and decimal point.
Table 7-1. Print Format Commands