Rice Lake Counterpart Configurable Counting Indicator - User Manual Rev. E - Version 2.5 - Manual (Page 88)

Table 7-2. Default Print Formats
Format Default Format String Used When
NFMT
N<NL>A30,75,0,4,1,1,N,"Gross:
<G>"<NL>B30,115,0,3,2,4,101,B,"<G>"<NL>A30,300,0,4,1,1,N,
"Tare: <T>"<NL>B30,340,0,3,2,4,101,B,"<T>"<NL>A30,525,0,4,1,1,N,
"Net: <N>"<NL>B30,565,0,3,2,4,101,B,"<N>"<NL>A30,806,0,3,1,1,N,"<TD>"<NL>
P1<NL>
Normal mode, tare in
system
PALFMT
N<NL>A416,25,1,4,1,1,N,"ID CODE:
<IDC>"<NL>B378,25,1,3,2,4,51,N,"3<IDC>"<NL>A296,28,1,4,1,1,N,"Total QTY:
<C>"<NL>B264,22,1,3,2,4,51,N,"<C>"<NL>
A179,25,1,4,1,1,N,"Part Name: <IDD>"<NL>A126,25,1,4,1,1,N,"Part Number:
<IDP>"<NL>A73,25,1,4,1,1,N,"Lot Number: <IDLT>"<NL>P1<NL>
When Print Pallet
softkey is pressed
CFMT
N<NL>B371,20,1,3,2,4,51,N,"3<IDC>"<NL>A410,20,1,4,1,1,N,"ID. CODE:
<IDC>"<NL>A302,22,1,4,1,1,N,"QTY:
<C>"<NL>B264,20,1,3,2,4,51,N,"<C>"<NL>A280,400,1,4,1,1,N,"GROSS
<G>"<NL>
A225,400,1,4,1,1,N,"TARE
<T>"<NL>B189,355,1,3,2,4,51,N,"4<T>"<NL>A120,400,1,4,1,1,N,"NET
<N>"<NL>A195,24,1,4,1,1,N,"WT/K OR U
W"<NL>B124,20,1,3,2,4,51,N,"1<IDW>"<NL>
A47,16,1,4,1,1,N,"<TD>"<NL>A160,24,1,4,1,1,N,"<IDW>"<NL>P1<NL>
Count mode
GFMT
N<NL>A376,47,1,4,4,3,N”G<G>”<NL>B233,73,1,3,2,4,101,B”<G>”<NL>A73,77,1,
4,1,1,N”<TD>”<NL>P1<NL>
Normal mode, no tare in
system
TOTAL
N<NL>A410,32,1,5,2,1,N,"<TOTAL
QUANTITY>"<NL>A57,532,1,3,1,1,N,"<TD>"<NL>A309,39,1,5,2,1,N,"<TTLV>"<NL
>B195,32,1,3,2,4,101,N,"<TV>"<NL>
A61,32,1,5,1,1,N,"BOX COUNT: <TTLC>"<NL>P1<NL>
Totalization mode
SPFMT
N<NL>A274,53,1,2,3,3,N,”<IDD>”<NL>B421,55,1,3,1,2,96,B,”<IDC>”<NL>A96,49,
1,1,4,4,N,”QTY<SCVC>”<NL>P1<NL>
Setpoint mode
ACCFMT
N<NL>A410,32,1,5,2,1,N,"TOTAL
QUANTITY"<NL>A57,532,1,3,1,1,N,"<TD>"<NL>A309,39,1,5,2,1,N,"<A>"<NL>B19
5,32,1,3,2,4,101,N,"<AC>"<NL>
A61,32,1,5,1,1,N,"ACCUMULATIONS: <AC>"<NL>P1<NL>
Accumulator enabled
and displayed
Note
82 Counterpart Counting Scale Indicator
The 500-character limit of each print format string includes the output field length of the print formatting
commands, not the command length. For example, if the indicator is configured to show a decimal point, the
<G> command generates an output field of 13 characters: the 10-character weight value (including decimal
point), one space, and a two-digit units identifier. The two header formats as limited to 100 characters each.
The default Counterpart print formats are shown in Table 7-2 and Table 7-3:
Table 7-3. H1, H2 Formats
Format Default Format String Sample Output
H1 Company Name <NL> Street Address <NL> City, ST ZIP <NL2> Company Name, Street Address, City, ST ZIP
H2 Company Name <NL> Street Address <NL> City, ST ZIP <NL2> Company Name, Street Address, City, ST ZIP