Dynon Avionics SkyView Pilots Users Guide - Manual (Page 198)

SkyView Touch (SV-D1000T) Operation
9-4 SkyView Pilot’s User Guide - Revision S
Figure 206 - Map Touch Regions
Touch Region functions:
1. Info items that display information only - such as those colored red in the image above -
do not respond to touch.
2. Touching the Map Pointer information bar will exit panning mode. The map will resume
following the aircraft.
3. The + and – will zoom the map in or out. In addition, you can use two fingers anywhere
on the map to pinch to zoom in or out of any point or area of interest.
4. Touching any of the shortcut info item buttons will result in the same action as pressing
the corresponding menu softkey regardless of what menu is currently displayed. These
touchable info items are only available on touch displays,:
a. Touching FPL Source will toggle the course legs displayed on the SkyView map
between the SKYVIEW flight and any available external flight plans connected to
SkyView. It is the same as selecting that device’s Flight Plan in the Flight Plan
menu and choosing the “SHOW _EXTERNAL NAVIGATOR_ FPL on MAP” option.