Dynon Avionics SkyView Pilots Users Guide - Manual (Page 34)

SV-D700, SV-D1000 and SV-D1000T Operation
3-8 SkyView Pilot’s User Guide - Revision S
Figure 5–Joystick Menu
To set the function of a joystick:
1. Click a joystick or move it in any direction to enter its Joystick Function Menu.
2. Choose the joystick function by moving the joystick up or down.
3. Confirm the highlighted function by clicking the joystick or moving it left or right.
If the Map Page is onscreen, the joystick closest to the Moving Map is labeled (MAP) and is used
to affect the Map Page and cannot be assigned a different function.
How to Enter the In Flight Setup Menu
When airspeed is greater than zero or groundspeed is greater than 15 knots, simultaneously
pressing and holding buttons 7 and 8 when on the Main Menu will open the In Flight Setup
Menu. This menu gives users access to SkyView system tools which may be useful during flight
such as the Flight Angle Pitch Adjust Page and the Angle of Attack Calibration Wizard.
You may also access the Setup Menu from the In Flight Setup Menu by using the ENTER FULL
SCREEN SETUP MENU… option.
How to Check Installed Database Status
Enter the Installed Databases Page (IN FLIGHT SETUP MENU > FULL PAGE SETUP MENU > LOCAL
DISPLAY SETUP > INSTALLED DATABASES) to see which databases are installed and their
respective versions.
How to Adjust Time Zone Offset
Enter the Time Zone Offset Page (IN FLIGHT SETUP MENU > FULL PAGE SETUP MENU > SYSTEM
SETUP > TIME > TIME ZONE OFFSET) and adjust the time zone accordingly.
How to Configure the Top Bar
The Top Bar is the strip across the top of the screen. It displays textual information such as the
clock and autopilot status. Future software updates will use this space for information such as
radio status.
Enter the Top Bar Setup Page to configure the Top Bar (IN FLIGHT SETUP MENU > FULL PAGE
SETUP MENU or > LOCAL DISPLAY SETUP > TOP BAR SETUP).