Dynon Avionics SkyView Pilots Users Guide - Manual (Page 71)

SkyView Pilot’s User Guide - Revision S 5-1
5. EMS Operation
This chapter describes SkyView EMS functionality and a few of the advanced ways to use it to
monitor the health and operation of your engine.
This chapter references the Engine Page. This page should have been configured
during SkyView installation. Reference the SkyView System Installation Guide for
more information.
Engine Page Layout
The three Engine Pages (100%, 50%, and 20%) should have been configured during
installation. The appearance of the 20% and 50% Engine Pages are not scaled down
versions of the 100% Engine Page. They are unique layouts and must be laid out
individually.
The Engine Page as shown in Figure 65 displays important engine parameters acquired using an
SV-EMS-220 module, its sensors, and other advanced engine monitoring features.
Figure 65–Example 50% SkyView Engine Page
Its appearance is determined using the Screen Layout Editor under the EMS Setup Menu and
should have been configured during installation. All EMS widgets that have assignable color
ranges, can include: red, yellow, green, black, blue, white, purple, cyan, and orange, for